| Digital MicroMirror
Device?/b> |
3 x 0.9" Dark Metal 3
type Equipped with advanced TI
DLPCinema?technology:
CineBlack?Contrast Management
CineCanvas?Image Management
CineLink?Security Management
CinePalette?Color Management |
| Resolution |
1280 x 1024 per Red, Green and Blue channels. Equivalent to 3.9
million pixels. |
| Color
Processing |
Bit depth: 45 bit (15 bit per
color)
Color Shades: 35 trillion
Color Gamut: 40% better than HDTV
(equivalent to film) |
| Lamp |
2.0 kW Xenon arc
Typical lifetime: 800 hours
Maximum lifetime: 1000 hours
?Slide-in quick change lamp
module |
| Brightness |
Meets or exceeds SMPTE screen brightness standards up to 10 m (33 ft)
wide on a 1x gain screen. Adjustable light output to conform to SMPTE
screen brightness standards on smaller screen sizes via optional CLO
software. |
| Brightness
uniformity |
> 90% for the total
screen area |
| Contrast
Ratio |
1350:1 (full white / full
black) |
| Digital Video
Inputs |
2 x SMPTE 292M inputs, selectable individually or as a
linked pair
Dual port to support future digital cinema
formats
?Single port compatible with the formats listed as
follows |
| Graphics
Input |
?DVI interface,24 bit RGB, 1280 x 1024, with frequency
range 23 - 96 Hz
DVI standard resolutions (640x480, 800x600, 1024x768 and
1280x1024).
Also supports non-standard packaging at 10 or 12 bit per
color |
| Prime
Lenses |
SDC 2.0 - 2.8:1 zoom
SDC 2.8 - 5.0:1 zoom
SDC 5.0 - 8.0:1 zoom |
| Anamorphic
Lenses |
1.5x (flat) and 1.9x (scope) options |
| Lens
Shift |
Motorized. Up to 100% vertically, 65% horizontally via
D-Cine COMMUNICATOR
control software or RC567 local touch
screen control. |
| Image
Control |
Via D-Cine COMMUNICATOR software
for projector, lens and source set-up plus display, geometry (resizing),
masking (cropping) and color calibration. |
| Control
Interface |
PC set up via RS232/RS422 Serial Communications and 10/100 baseT
Ethernet connection. |
| Diagnostics |
Via optional RC567 touch screen control:
-Temperatures of DMD, power supply, lamp house and
ambient
- Status of power supply voltages, lamp run time, lamp
strikes
- alarm messages
Via D-Cine COMMUNICATOR control
software:
All of the above plus:
-Status of switch mode and lamp power supplies, TI video
process cards, CLO and card cage security
-Projector log file |
| Power
Supply |
Slide in modular projector power supply unit |
| Power
consumption |
2550 Watt, 230V (tolerance 190V-253V) |
| Weight |
85kg / 188lbs excluding anamorphic lenses |
| Digital
Head |
OPTIONAL:
CLO - Constant Light Output processing
Dual Anamorphic Lens fitting for 1.5x and 1.9x
lenses
rolley incorporating 12u x 19" rack for ACSAR and server
mounting. Fitted with lockable wheels and adjustable up to a 15 degree
tilt angle |
